THE PROBLEM

1. Removal of marks left by lime removal cleaners, lemon juice, vinegar, etc.

The mark is white, matt and rough to the touch.

SMOOTHING

Dampen the surface with some water and rub in circles for one minute, without pressing, with the yellow FilaMarbleOne pad.

Pressing harder, work with the white FilaMarble Two pad for a few minutes, and then pass the blue FilaMarble Three pad in the same way, extending the working area slightly.

Dry with a cloth or absorbent kitchen paper.

If the edges of the mark are still visible, repeat the operation.

At the end, the area should become uniformly smooth and not yet polished.

POLISHING

Wear rubber gloves. Shake the bottle of Fila MarbleShine well and pour a small amount on the area to be polished. Add a few drops of water to thin the cream.

With the white Fila MarbleSponge pad, rub the area for at least two minutes using a circular movement.

Then, for an overall restored look, apply Fila MarbleShine over the whole surface, rubbing gently with the Fila MarbleSponge pad.

Carefully remove any residual matter with a damp sponge and dry with a soft cloth.

If the surface is not shiny enough, polish again with

Fila MarbleShine. To complete the operation, apply Formula Marmo with a soft cloth over the entire surface.